Skip to Content

Changing wheel size in Belgium: what the law allows

Certificate of conformity, diameter tolerance, technical inspection, insurance and smaller winter tyres: the rules in figures before you change wheels.
November 10, 2026 by
Changing wheel size in Belgium: what the law allows

Fitting 18-inch wheels to a car delivered on 16-inch ones: Belgian law allows it, within precise limits. Outside those limits, the car risks a red certificate at the technical inspection.

Here is where to find the permitted sizes for your car, the margins allowed and what the technical inspection and your insurer check. Rules up to date as of 31 October 2026.

✅ The key points in 30 seconds

  • The sizes specified for your car appear on its certificate of conformity (COC): box 35 for the original fitment, box 52 for the other combinations.
  • For a size not listed on the COC, the overall diameter of the wheel must stay between -2% and +1.5% of the original. The track width may not increase by more than 2%.
  • The load index and speed rating of the tyres must be at least equal to those specified. Only the speed rating of winter tyres (M+S) may be lower, from 1 October to 30 April, with a dashboard label. In Flanders, the technical inspection requires at least 160 km/h.
  • The European assessment grid for technical inspections classes a non-compliant size that affects safety as a major deficiency. In Wallonia, this means a red certificate and 15 days to return.
  • A modification that permanently increases the risk must be declared to your insurer. Without notification, it may reduce its payout.

Which wheel and tyre sizes are allowed on my car?

Open the car's certificate of conformity, the COC. On a recent COC, box 35 gives the wheel and tyre combination fitted at the factory. Box 52, ‘Remarks’, lists the additional approved combinations. A set of winter tyres supplied as an extra may also appear there.

Some cars have a type-approval report (PVA) instead of a COC. For the load index and speed rating, the law also accepts the manufacturer's owner's manual.

No longer have the COC? See how to get a duplicate certificate of conformity.

The tyre sidewall shows the size. Example taken from the law: 195/65 R 15 91 H.

MarkingMeaning
195Tyre width: 195 mm
65Aspect ratio: the sidewall height is 65% of the width
RRadial construction
15Rim diameter: 15 inches
91Load index: 615 kg per tyre
HSpeed rating: 210 km/h

Most common speed rating letters: T = 190 km/h, H = 210 km/h, V = 240 km/h, W = 270 km/h, Y = 300 km/h.

Can you fit bigger wheels? The diameter and track width rule

A bigger rim is fitted with a lower-profile tyre, to keep the same overall diameter. The law regulates this change on cars (Article 34 of the Royal Decree of 15 March 1968):

  • Diameter: if the fitted tyres are not the ones originally specified, their diameter must stay between -2% and +1.5% of the original values. The text refers to the tyres specified in the type-approval report. If the COC lists several sizes, it is not specified which one serves as the baseline: ask your inspection station.
  • Track width: with non-original wheels or tyres, the track width may not increase by more than 2% (4% for a vehicle type-approved as off-road). On a track width of 1,550 mm, that is 31 mm in total, or 15.5 mm per side.
  • Bodywork: it must cover the tyres. Clearance must remain between the tyre and the inside of the wheel arch in all circumstances.
  • Same axle: both tyres must have the same technical characteristics.

Example for a car delivered on 205/55 R16. Overall diameter = rim diameter (inches × 25.4 mm) + twice the sidewall height. For the original fitment: 16 × 25.4 + 2 × 205 × 0.55 = 631.9 mm. Garage Privé calculations:

SizeOverall diameterDifferenceWithin the margin?
205/55 R16 (original)631.9 mmreferenceyes
225/45 R17634.3 mm+0.4%yes
225/40 R18637.2 mm+0.8%yes
225/35 R19640.1 mm+1.3%yes, only just
215/50 R17646.8 mm+2.4%no
205/60 R16652.4 mm+3.2%no

The diameter margin is not enough. The tyre must also fit under the bodywork and touch nothing, with the wheels turned and the suspension compressed. A 225 mm tyre is 2 cm wider than a 205 mm tyre.

💡 A bigger wheel also changes fuel consumption. Wider tyre, heavier wheel: we have quantified the effect in our article on wheels and fuel consumption.

Is the speedometer inaccurate with different wheels?

UN Regulation No 39 prohibits a speedometer from showing less than the actual speed. At type approval, it may show more, up to 10% of the actual speed plus 4 km/h.

A bigger wheel makes you go faster than with the original fitment, for the same reading. The speedometer's original margin can absorb part of the difference. Garage Privé calculation, assuming a speedometer that is exact with the original 205/55 R16 fitment. At an indicated 120 km/h, you are actually doing 121 km/h on 225/40 R18 and 124 km/h on 205/60 R16. Within the legal +1.5% margin, the difference stays under 2 km/h at 120 km/h.

The European assessment grid for technical inspections includes no measurement of speedometer accuracy. The inspector only checks that it works and is lit.

What does the technical inspection check on wheels and tyres?

European Directive 2014/45 sets a minimum list of deficiencies, classified by severity. This is how it classes the cases linked to a change of wheels:

FindingSeverityConsequence
Non-compliant wheel or tyre size that affects safetyMajorRed certificate
Non-compliant load index or speed rating that affects safetyMajorRed certificate
Rating insufficient for actual use, or tyre touching a fixed part and impairing safe drivingDangerousPossible ban from the road
Different sizes on the same axleMajorRed certificate
Tyre pressure sensor obviously inoperativeMajorRed certificate

In Wallonia, a red certificate gives you 15 days to carry out repairs and return, according to AutoSécurité. The version marked ‘banned from the road’ only allows a direct, unloaded journey to your home or the repairer. The Article 34 rules are the same in all three Regions. Walloon and Flemish centres do not check them in the same way.

Wallonia: according to AutoSécurité, the speed rating and load index must be at least equal to those in the PVA, the COC or the manufacturer's owner's manual. The difference in wear between the left and right tyres on an axle may not exceed 3 mm.

Flanders: since 1 December 2024, the Flemish technical inspection has required at least 160 km/h for every tyre. If a tyre's rating is lower than the car's top speed, a dashboard label is mandatory. Without it, the car fails.

The law also requires an inspection before returning to the road after a modification that changes the car's technical characteristics (Article 23sexies). We found no text that specifies whether a change of wheels counts. Keep the wheels within the COC dimensions and the question does not arise.

Before the appointment, compare the fitted tyres with boxes 35 and 52 of the COC. Here is our guide to what the technical inspection checks.

Do you need to tell your insurer when you change wheels?

The Act of 4 April 2014 requires you to declare, during the contract, any new circumstance that permanently increases the risk (Article 81). The insurer then has one month to propose a new premium, or to cancel if it would never have covered that risk.

If there is a claim without notification:

  • An omission you cannot be blamed for: the insurer pays as normal.
  • An omission you can be blamed for: it pays in proportion to the premium paid compared with the premium that would have been due. If it would never have covered that risk, it only refunds the premiums.
  • Fraud: it refuses cover.

Under motor third-party liability insurance, victims are always compensated. The insurer can then claim the money back from you. According to the 2024 Assuralia brochure, this right of recourse is limited to 250 € for an unintentional misstatement. It can rise to 31,000 € if the car had failed its technical inspection and the insurer proves a link with the accident.

Assuralia advises reporting any modification the insurer is unaware of. Send an email with the fitted sizes: you keep written proof.

Winter tyres smaller than summer tyres: is it allowed?

Yes, if the size appears in the car's documents (COC, PVA) or stays within the diameter margin. Example: a car delivered on 225/40 R18 stays within the margin on 205/55 R16 in winter, with 0.8% less diameter. The margin is always calculated from the original size. Also check that the smaller rim clears the brakes.

For the speed rating, from 1 October to 30 April the law tolerates winter tyres (M+S) with a lower rating than the original tyres. Two conditions: adapt your speed and stick a reminder label where the driver can see it. In Flanders, the minimum remains 160 km/h.

The TCS tested the same winter tyre in five sizes on a Volkswagen Golf, from 195/65 R15 to 225/40 R18. The smaller sizes do better on snow and in aquaplaning. They cost less and use less fuel. They are also quieter, but wear faster. The 18-inch does better on dry roads. The TCS generally recommends the smaller size.

If the car has pressure sensors in each wheel, ADAC puts the cost of equipping a second set at 120 to 300 € in Germany. To choose between winter and all-season tyres, read our winter tyre guide.

Wheel spacers and TÜV wheels: are they allowed in Belgium?

Wheel spacers: the Belgian technical regulations do not mention them. The 2% limit on extra track width applies to non-original wheels and tyres. The bodywork rule still applies: it must cover the tyres. We found no public position from the inspection centres. Ask your station before you buy.

German TÜV documents: a wheel sold with an ‘ABE’ or a ‘Teilegutachten’ is approved in Germany for specific combinations of rim, tyre and car. The Belgian inspection refers to the PVA, the COC or the manufacturer's owner's manual. We found no Belgian source that recognises these German documents.

E-marked wheels (UN Regulation No 124): this regulation covers replacement wheels that share the designation, offset and fixing of an original wheel. It requires at least 3 mm between the wheel and the brakes. We found no Belgian text that makes it mandatory.

Used or imported car with non-original wheels: what to check?

  • Before buying: compare the fitted tyres with boxes 35 and 52 of the COC. A size outside the COC and outside the margin exposes you to a red certificate at the pre-registration inspection.
  • Imported car: the pre-registration inspection in Belgium is limited to a visual inspection if the car passed a technical inspection in its country less than 2 months ago. Otherwise, it undergoes a full inspection.
  • Before selling: refit the original wheels or hand them over with the car. The buyer avoids a nasty surprise at inspection and you limit the risk of a dispute.

Every car we sell undergoes a 118-point inspection, tyres and manufacturing date included. We also prepare our customers' cars for the technical inspection, then present them for inspection on their behalf. Garage Privé does not sell wheels.

Free valuation and free advice

Selling a car with non-original wheels, or preparing for a technical inspection? Visit us in Wavre or call 010 56 13 80.

  • Free valuation of your car
  • Car check before the technical inspection
  • Your car presented for technical inspection on your behalf

👉 Request my free valuation

👉 Book an appointment for advice

Frequently asked questions about wheel size

Yes, if the size appears on the certificate of conformity (box 35 or 52). Otherwise, the overall diameter must stay between -2% and +1.5% of the original, the track width may not increase by more than 2% and the bodywork must cover the tyres. The load index and speed rating must remain at least equal to those specified.

On the certificate of conformity: box 35 for the original fitment, box 52 for additional combinations. Some cars have a type-approval report (PVA) instead. The manufacturer's owner's manual also serves as a reference for the load index and speed rating.

In principle no, if they appear on the COC or meet all the legal margins. A non-compliant size or rating that affects safety is a major deficiency: red certificate, and 15 days to return according to AutoSécurité. A tyre rubbing against the bodywork is a major deficiency, or a dangerous one if it impairs safe driving.

The law requires you to declare a circumstance that permanently increases the risk. If the omission can be held against you, the insurer may reduce its payout in proportion to the premium. Report the change in writing, with the fitted sizes.

Yes, if the size appears on the COC or the PVA, or stays within the diameter margin. A lower speed rating is tolerated from 1 October to 30 April, with a dashboard label. In Flanders, the tyre must be rated for at least 160 km/h.

Slightly. With a larger diameter, the car goes faster than with the original fitment, for the same reading. A speedometer must never show less than the actual speed: its original margin can absorb part of the difference. Within the legal +1.5% margin, the difference stays under 2 km/h at 120 km/h.

The Belgian technical regulations do not mention them, and we found no position from the inspection centres. The legal 2% limit on extra track width applies to non-original wheels and tyres. The bodywork must always cover the tyres. Ask your inspection station for advice before fitting them.

Yes. The law requires the same technical characteristics on the same axle. Different sizes on an axle are a major deficiency at the technical inspection.

About the authors Louis and Nathan advise Garage Privé's customers in Wavre. Since 2018, the agency has been selling used cars on behalf of their owners, with a 118-point inspection and an optional warranty of up to 60 months.

Sources

Bigger wheels and fuel consumption: what the extra inches cost
Fuel consumption, electric car range, CO2 and Belgian taxes, tyre prices: the effect of 17, 19 or 20-inch wheels, backed by figures.